Research
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Team
Partners
Contact
News
Library
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Portfolio Carousel
Search
Aug 2019 - Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by WAAM
Home
Library
Research papers
Aug 2019 - Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by WAAM
Navigation
Research papers
September 22 - Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti–6Al–2Sn–4Zr–2Mo–0.1Si and Ti–6Al–4V Built With Inter-Pass Deformation
August 22 - Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by wire and arc additive manufacture
June 2022 - Split anode calorimetry for plasma arc energy density measurement with laser calibration
June 2022 -Multi-energy source (MES) configuration for bead shape control in wire-based directed energy deposition (w-DED)
June 2022 - A simplified modelling approach for thermal behaviour analysis in hybrid plasma arc-laser additive manufacturing
December 2021 - Tailoring equiaxed β-grain structures in Ti-6Al-4V coaxial electron beam wire additive manufacturing
November 2021 -In-situ observation of single variant α colony formation in Ti-6Al-4V
July 2021 - Characterising and representing small crack growth in an additive manufactured titanium alloy
June 2021 - Effect of Substrate Alloy Type on the Microstructure of the Substrate and Deposited Material Interface in Aluminium Wire + Arc Additive Manufacturing
May 2021 - Fatigue of wire+arc additive manufactured Ti-6Al-4V in presence of process-induced porosity defects
April 2021 - Influence of deposition strategies on tensile and fatigue properties in a wire + arc additive manufactured Ti-6Al-4V
April 2021 - Effect of deposition strategies on fatigue crack growth behaviour of wire + arc additive manufactured titanium alloy Ti–6Al–4V
April 2021 The potential for Grain Refinement of WAAM Ti-6Al-4V by ZrN and TiN inoculation
February 2021 - Wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V
December 2020 - Isomorphic Grain Inoculation in Ti-6Al-4V during Additive Manufacturing
October 2020 - The role of microstructure and local crystallographic orientation near porosity defects on the high cycle fatigue life of an additive manufactured Ti-6Al-4V
October 2020 - Quantification of strain fields and grain refinement in Ti-6Al-4V inter-pass rolled wire-arc AM by EBSD misorientation analysis
October 2020 - In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding
Sept 2020 -Confirmation of rapid-heating β recrystallization in wire-arc additively manufactured Ti-6Al-4V
July 2020 - The effect of wire size on high deposition rate wire and plasma arc additive manufacture of Ti-6Al-4V
Jun 2020 - Continuous monitoring of an intentionally-manufactured crack using an automated welding and in-process inspection system
May 2020 - The effect of processing parameters on rapid-heating β recrystallization in inter-pass deformed Ti-6Al-4V wire-arc additive manufacturing
May 2020 - The Effectiveness of Grain Refinement by Machine Hammer Peening in High Deposition Rate Wire-Arc AM Ti-6Al-4V
Apr 2020 - Investigating the effect of residual stress on hydrogen cracking in multi-pass robotic welding through process compatible non-destructive testing
March 2020 - Wire Laser Arc Additive Manufacture of aluminium zinc alloys
March 2020 -On the observation of annealing twins during simulating β-grain refinement in Ti–6Al–4V high deposition rate AM with in-process deformation
Oct 2019 - Ultrasonic phased array inspection of a WAAM sample with intentionally embedded defects
Aug 2019 - Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by WAAM
July 2019 - High Cycle Fatigue and Fatigue Crack Growth Rate in Additive Manufactured Titanium Alloys
May 2019 - Fatigue testing of WAAM Ti-6Al-4V
January 2019 - Automated image mapping and quantification of microstructure heterogeneity in additive manufactured Ti6Al4V
Jan 2019 - On the origin of microstructural banding in Ti-6Al4V wire-arc based high deposition rate additive manufacturing
July 2021 - Bead shape control in wire based plasma arc and laser hybrid additive manufacture of Ti-6Al-4V
November 22 - A three dimentional wire feeding model for heat and metal transfer, fluid flow and bead shape in wire plasma arc additive manufacturing
January 2021 - Model-assisted ultrasonic calibration using intentionally embedded defects for in-process weld inspection
January 2023 - Mechanical performances of the interface between the substrate and deposited material in aluminium wire Direct Energy Deposition
October 2021 -Multi-layer ultrasonic imaging of as-built Wire + Arc Additive Manufactured components
June 2022 Increasing the speed of automated ultrasonic inspection of as-built additive manufacturing components by the adoption of virtual source aperture
June 2022 Collaborative Robotic Wire + Arc Additive Manufacture and Sensor-Enabled In-Process Ultrasonic Non-Destructive Evaluation
January 2022 Influence of Deposition Strategies on Residual Stress inWire + Arc Additive Manufactured Titanium Ti-6Al-4V
February 2023 - Strain controlled fatigue behaviour of a wire + arc additive manufactured Ti-6Al-4V
January 2023 - Parametric study of melt pool geometry in hybrid plasma arc‑laser melting process for additive manufacturing application
July 2023 - Effect of inter layer cold work on 2024 aluminium alloy produced by wire directed energy deposition
July 2023 - Process Control Methods in Cold Wire Gas Metal Arc Additive Manufacturing
May 2023 A fundamental investigation into the role of beam focal point, and beam divergence, on thermo-capillary stability and evolution in electron beam welding applications
July 2023 Predicting the Effect of Surface Waviness on Fatigue Life of a Wire + Arc Additive Manufactured Ti-6Al-4V Alloy
July 2023 - Fatigue crack growth behavior in an aluminum alloy Al–Mg–0.3Sc produced by wire based directed energy deposition process
October 2023 Thermo-capillary-gravity bidirectional modelling for evaluation and design of wire-based directed energy deposition additive manufacturing
November 2023 - In-process non-destructive evaluation of metal additive manufactured components at build using ultrasound and eddy-current approaches
September 2023 - Efficient reduced-order thermal modelling of scanning laser melting for additive manufacturing
October 2023 - Thermal fluid dynamics of the effect of filler wire on deposition rate and bead formation intending plasma arc-based DED
January 2024 - From Wire to Component: Aluminium Lithium Alloy Development for Wire and Arc Additive Manufacturing
Annual Reports
Newsletters
Aug 2019 - Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by WAAM
Download MatDev_Aug2019.pdf
— 10456 KB